Indicator Accessories - Electronic Accessories Only
| EDP # |
POWER SOURCES |
PRICE |
| E60-0012 |
BATTERY, 3V LITHIUM CR2450 |
$2.98 |
| G11-0012 |
A/C ADAPTER, 110 VOLT |
$32.00 |
| G11-0014 |
A/C ADAPTER, 220 VOLT |
$92.00 |
| G21-0010 |
MULTI-ADAPTER |
$195.00 |
| G21-0015 |
A/C MULTI-ADAPTER, 220 VOLT |
$205.00 |
| EDP # |
DATA OUTPUT CABLES |
PRICE |
| G03-0019 |
MTI |
$88.00 |
| G13-0048 |
USB Data Cable |
$128.00 |
| EDP # |
SPECIALTY CABLES |
PRICE |
| G03-0011 |
MULTI-ADAPTER, EXT CABLE |
$36.00 |
| G03-0022 |
GAGE TO REMOTE READOUT |
$75.00 |
| G03-0024 |
REMOTE PROBE CABLE EXTENSION |
$48.85 |
| G03-0031 |
REMOTE CLEAR |
$88.30 |
| G03-0032 |
REMOTE HOLD |
$88.30 |
| G03-0033 |
REMOTE CLEAR & HOLD |
$102.00 |
| G13-0028 |
MULTI-ADAPTER |
$34.00 |
| EDP # |
2" & 4" TRAVEL ELECTRONIC GAGE ACCESSORIES |
PRICE |
| G20-0133 |
STEM ADAPTER, 2" & 4" |
$58.00 |
| M04-0007 |
DUST CAP 2" |
$9.65 |
| M04-0001 |
DUST CAP, 4" |
$13.35 |
| CDI513-2 |
DEPTH GAGE BASE 3" FOR 2" & 4" RANGE |
$85.20 |
| CID514-2 |
DEPTH GAGE BASE 4" FOR 2" & 4" RANGE |
$92.50 |
| CID516-2 |
DEPTH GAGE BASE 6" FOR 2" & 4" RANGE |
$98.75 |
| CDI77-20L |
LIFTING LEVER - 2" LEFT W/SPECIAL BACK |
$137.25 |
| CDI77-20R |
LIFTING LEVER - 2" RIGHT W/SPECIAL BACK |
$137.25 |
| CID77-40L |
LIFTING LEVER - 4" LEFT W/SPECIAL BACK |
$137.25 |
| CDI77-40R |
LIFTING LEVER - 4" RIGHT W/SPECIAL BACK |
$137.25 |
| EDP # |
ADDITIONAL ELECTRONIC GAGE ACCESSORIES |
PRICE |
| M04-0042 |
BEZEL COVER, CLEAR |
$2.98 |
| M04-0040 |
COVER, DATA PORT |
$3.98 |
| CALL CDI |
3/8"-24 THREADED STEM |
$99.25 |
| CALL CDI |
LONG STEM; 1", 1½", 2", 2½", 3", & etc. |
PER QUOTE |
| CALL CDI |
PUSHDOWN CONVERSION |
$62.75 |
| G19-0001 |
PRINTER, SERIAL IMPACT PRINTER |
$297.25 |
| G03-0021 |
CABLE, RS232 FOR NON SPC PRINTER (G19-0001) |
$89.55 |
| EDP # |
SPECIAL ORDER NOTES & OPTIONS |
PRICE |
| |
Gages or probes with 1" Travel or less can be obtained with an 8mm stem. When ordering add -2 after the model number. |
$25.00 |
| |
Gages or Probes can be obtained without a return spring at no additional charge. When ordering add -1 after the model number. |
$00.00 |
| |
Gages or Probes can be obtained with full metric capabilities, which include metric stem, metric contact point, metric glass scale & flat back. When ordering, change the last digit in the model number from 0 to 1. |
$45.00 |
| |
Gages or Probes can be obtained with full metric measuring system. When ordering, change the last digit in the model number from 0 to 2. |
$25.00 |
| |
Any Logic™ Plus, Logic™ Basic or Logic™ Readout can be supplied with up to (3) special ratios. This additional charge is per ratio |
$60.00 |
|
