CDI logo

Chicago Dial Indicator

American Made Precision Measuring Products Since 1932

CDI offers a variety of gages for your special gaging needs. All feature world-renowned CDI quality and reliability and represent the state-of-the-art in performance and design.

electronic indicator depth gage

Note: To view all table data, scroll table left and right.

PART #DESCRIPTIONPRICE 
DGM2665pdf Depth Gage $510.00 Call to Order
DG10-1pdf Depth Gage $500.00 Call to Order
DG10-2pdf Depth Gage $510.00 Call to Order
DG10-3pdf Depth Gage $520.00 Call to Order

Depth Gage: Model DGM2665

This gage is designed for measuring the depth of slots, holes, recesses, etc. from 0" to .4" deep. The flat base is positioned on the work surface, allowing the spindle to enter the hole or recess to its full depth. Measurements are automatically registered directly to the LCD display. The 1" diameter round base is hardened and ground, and is securely fastened to the indicator stem. The radius contact point is 3/16" diameter. All the features of the Logic Mini IQ are included in this versatile tool.

Depth Gage: Model DG10-1

This gage is designed for measuring the depth of slots, holes, recesses, etc. from 0" to 1" deep. The flat base is positioned on the work surface, allowing the spindle to enter the hole or recess to its full depth. Measurements are automatically registered directly to the LCD display. Zeroing is set with a fully-retracted contact point set flush with the bottom of the base. The 2 ½" wide x ½" thick base is hardened and ground, and is securely fastened to the indicator stem. All the features of the Logic IQ Series are included in this versatile tool.

Depth Gage: Model DG10-2

Depths of slots, grooves, recesses, etc. can be quickly measured. With all the features of the Logic IQ Series, knife edge base, and needle point contact, depths of up to .125" can be accurately measured. The cut-out base center allows an unobstructed view of the point. Zero is set with the fully-retracted contact point positioned flush with the base edge.

Depth Gage: Model DG10-3

Ideal for rapidly checking depth of holes, recesses, slots, etc., and for providing immediate readings. Fast and accurate measurements are obtained by zeroing the gage, which is achieved by setting the contact point flush with the base and pushing the "Clear" button. Simply push down the spindle until the contact point touches the work and reads the depth on the LCD display. The 2 ½" wide x ½" thick depth gage base is hardened and ground and is securely mounted to the indicator stem. All the features of the Logic IQ Series are included.
Join Our Email List