Electronic Dial Index

About Logic^TM Series | Logic^TM Basics | Logic^TM Plus | Logic^TM OEM | Logic^TM EMS
Specialty Gages | Digital Accessories | Digital Templates

Electronic Accessories

Power Sources | Data Output Cables | Certificates of Calibration | Specialty Cables | Special Order Notes & Options

Specialty Gages

LOGIC^TM PLUS SPECIALTY GAGES

PART #

DESCRIPTION

DG10-1

DEPTH GAGE

DG10-2

DEPTH GAGE

DG10-3

DEPTH GAGE

DG10-9

HAND GAGE 1"

DG10-10

HAND GAGE ½"

DG10-12

HAND GAGE ½"

Depth Gage: Model DG10-1

This gage is designed for measuring the depth of slots, holes, recesses, etc. from 0" to 1" deep. The flat base is positioned on the work surface, allowing the spindle to enter the hole or recess to its full depth. Measurements are automatically registered directly to the LCD display. Zeroing is set with a fully-retracted contact point set flush with the bottom of the base. The 2 ˝" wide x ˝" thick base is hardened and ground, and is securely fastened to the indicator stem. All the features of the Logic-Plus Series are included in this versatile tool.

Knife Edge Depth Gage: Model DG10-2

Depths of slots, grooves, recesses, etc. can be quickly measured. With all the features of the Logic Plus Series, knife edge base, and needle point contact, depths of up to .125" can be accurately measured. The cut-out base center allows an unobstructed view of the point. Zero is set with the fully-retracted contact point positioned flush with the base edge.

Depth Gage-Push Down: Model DG10-3

Ideal for rapidly checking depth of holes, recesses, slots, etc., and for providing immediate readings. Fast and accurate measurements are obtained by zeroing the gage, which is achieved by setting the contact point flush with the base and pushing the "Clear" button. Simply push down the spindle until the contact point touches the work and reads the depth on the LCD display. The 2 ˝" wide x ˝" thick depth gage base is hardened and ground and is securely mounted to the indicator stem. All the features of the Logic-Plus Series are included.

Portable Hand Gauges

Compact and portable…designed specifically for hand use. Ideal for conveniently measuring the thickness of a wide range of materials and small parts. Easy to hold in one hand - to operate, simply press down the lifting lever. This raises the spindle, permitting easy insertion of work between the anvil and contact point. Releasing the lifting lever causes the spindle to contact the work being measured. Includes all the features of the Logic Plus Series.

• Model No. DG10-9: 1" range, 1" round anvil, 6" throat depth

• Model No. DG10-10: ˝" range, 1" round anvil, 2" throat depth

• Model No. DG10-12: ˝" range, 1" round anvil, 1" throat depth

2:1 Ratio Gage: Model LG2100-0-0001

LCD displays twice the value of the spindle movement. Ideal for Chamfer gages or where measuring radius and obtaining diameter readings. Includes all the features of the Logic Plus Series.

Special Ratio Gages

Special ratios can be obtained in the Logic OEM Series of gages. Multipliers from .01 to 99.9 and inverse equivalents offer endless possibilities for creating special purpose gages.