| Plus, the following additional features:
Absolute/Preset measuring mode:
A preset value can easily be entered. The gage display cannot exceed 99.9" or 999mm. If
gage is turned off, the preset value is retained.
Minimum reading hold:
Displays and holds the lowest reading. Actual spindle position is retained.
User tolerance preset (high and low):
Allows for the easy entering of high and low tolerances. When tolerances are exceeded, the display will flash and either high or low will be
indicated. If the gauge is turned off, tolerance numbers are retained.
T.I.R. measuring mode:
Gage displays the difference between the highest and lowest values reached.
Display/freeze reading hold:
Holds the reading after the measurement has been taken. Ideal for use in hard to reach areas. Actual spindle position is retained.
Feature lock:
This unique feature locks the selections made by the customer. This prevents the operator from inadvertently making changes.
Floating Reference:
Allows the setting of the absolute/preset number at any position of the spindle.
The following chart contains all standard LogicTM Plus Electronic indicators arranged by travel. |
