Accessories to complement your precision electronic indicators.
Backs
Center lug back is supplied on all gages with 1.0" travel or less. Other backs are available for special mounting applications.Contact Points
A ¼" contact point is supplied as standard on all gages. A wide variety of points - from flat, wide face flat, taper, to button - are available.Depth Gage Bases
A complete range of sizes , with various hole locations and stem mounting collets, are available. Bases range from 2" to 8" wide and are 5/8" thick.Dust Cap
Gages are supplied with lifting knob as standard. A dust cap is recommended in place of the lifting knob in areas where contamination is present.Lifting Lever
Lifts the spindle to permit work to be placed under contact point. Lever is mounted on top of stem and replaces lifting knob or dust cap.Dust Guard
Protects spindle and bushing from dirt and oil. Flexible and oil-resistant.Data Output Cables
6-foot cable for interfacing gage to computer, printer, or data collection devices.P/N G03-0018 for RS232, P/N G13-0034 for CDI (BCD) pigtails one end
P/N G03-0021 for CDI Printer, P/N G03-0019 for MTI, P/N G03-0022 Logic Gage to Remote Readout.
Spindle Conversions
P/N M00-0020 converts English spindle to accept Metric contact points. P/N M00-0022 converts Metric spindle to accept English contact points.8MM Stems
Any gage with 1.0" or less travel can be obtained with an 8mm stem. Designed for mounting in an 8mm fixture or bushing. A flat back is also provided. To order, place -2 after model number.A/C Adapter
Provides continuous power to gage. Available in either 110V (P/N G11-0012) or 220V (P/N G11-0014).Multi-Adapter (P/N G21-0010)
A logical choice for multiple gauging fixtures or where multiple power connections are not available. Unit can power up to 8 gages and is supplied with 2 cables. Additional cables (P/N G13-0012) are available to meet your needs.Spindle Weight
Assures constant, uniform pressure throughout the measuring range. Ideal for compressible materials such as plastic, felt, rubber, cloth or for any application requiring constant contact pressure. Weights of 40, 50, 60, 80, and 100 grams are standard. Other weights can be provided. Minimum weight available is 40 grams.Printers
Model G19-0001: Serial Impact Offer hard copy print of measurements. Selectable baud rates, standard RS232 DB25 pin port and A/C adapter.
